《お取り寄せ商品》Cherokey: A 4WD Arduino Basic Robot Building Kit
送料区分: 650
商品コード: DFROBOT-ROB0117
発売日: 2018-11-21
短いURL: ssci.to/4959
この商品は取寄商品です
本商品はお取り寄せ商品(輸入代行)です。他の商品と同時にご注文いただいた場合、全ての商品が入荷してから出荷します。お急ぎの商品と一緒にご注文なさらないよう、ご注意下さい。この商品のお買い求めの手続きを完了し、代金のお支払いをいただいてから、お取り寄せを行います(請求書払いのご契約をいただいている場合には、もちろんこの契約が優先です)。納期は仕入先に在庫がある場合、通常1.5~2ヶ月ほどです。発注は定期的に、まとめて行いますので、お取り寄せ依頼時に仕入先在庫があっても、当社発注時に仕入先在庫がない場合、納期は未定となります。
本商品は電気用品安全法、電波法、その他日本の法律に準拠していない可能性があります。本商品のお取り寄せは輸入代行サービスです。お取り寄せのご案内をご確認の上、ご注文ください。当社はお取り寄せ品に関して一切の責任を持ちません。お客様自身で適法かつ安全にご利用いただけることを充分にご確認いただき、お取り寄せをご依頼ください。また商品が輸入できないなどの問題が発生した場合、ご注文をキャンセルする場合があります。
Introduction
The Cherokey 4WD Basic Arduino Robot Kit is a perfect wheeled robot platform to build your own robot and to get started with Arduino Robot. With just a few simple steps of assembling the hardware and tuning the software, and you'll learn all about Arduino, robotics, sensors, bluetooth communication — as well as obstacle avoidance and remote control. You can also take it further with your own code to take advantage of the ultrasonic sensor, Romeo (All-in-one Bluetooth Microcontroller), IR sensors and LEDs.
Cherokey 4WD Arduino Basic Robot Building Kit is a versatile mobile robot platform compatible with most popular microcontrollers like Arduino Uno, Mega2560, Romeo, Raspberry Pi, ...etc. Cherokey 4WD Arduino Basic Robot Building Kit embedded the L298P motor driver chip which allows to drive two 6-12V DC motors with maximum 2A current. The integrated 2 way DC motor driver and Xbee & APC220 socket allows you to start your project immediately without the need for an additional motor driver or wireless shield.
Its expansion plate board significantly increases the surface area of Cherokey, allowing you to easily connect a 9g micro servo or a standard sized servo in two different locations, so that you can install robotic arm or ultrasonic/ir sensors. The prototyping area make you convenient to install sensors on the robot. Double-side leaf pads solder prototyping areas in the middle can be soldered with DIP components or SMD components to extend addition function.
Its high-strength aluminum alloy body material also provides flexibility in rapid movement particularly in outdoor grass, gravel, sand or sloped surface. The Cherokey 4WD arduino robot is also suitable for robot competitions and research related projects.
Thanks to Romeo BLE, this kit can now be played with APP(IOS). Simply download the APP (GoBLE) and enjoy controlling from you IOS device!
Specification
- Controller: Romeo BLE
- Microcontroller: ATmega328P
- Board: Arduino UNO
- Controller Operating Voltage: 5V
- Controller Input Voltage (recommended): 7 ~ 12V
- Ultrasonic Sensor Detecting range: 4cm-3m (3-5m is possible, but depending on situations)
- Rotation range: 0 - 180
- Size(Assembled): 220mm*175mm*170mm(8.66"*6.89"*6.69")
- Weight: 772g(Excluding battery)
- Maximum Load: 500g
- TT Geared Motor Specification
Documents
ShippingList
- Romeo BLE (Arduino Compatible Atmega 328) (DFR0305) x1
- DF05BB Standard Servo (5kg) (SER0020) x1
- URM37 V4.0 Ultrasonic Sensor (SEN0001) x1
- URM ultrasound mounting bracket (FIT0006) x1
- Cherokey 4WD chassis x1
- Cherokey expansion plate x1
- Aluminum side-panel x2
- Aluminum connecting-rod x4
- DC Barrel Jack Adapter - Female (FIT0151) x1
- 5xAA battery holder x1
- PH-2.0 to DC-2.2 adapter x1
- Screws KIT x1
- Micro DC Geared Motors (FIT0016)x4
- Motor Wire x1
- Rubber Wheels (FIT0003) x4
- Jumper Wires 9" F/F (10 Pack)( FIT0030) x1
- Magnet Micro USB Cable 1.2m ( FIT0351-OE) x1
上記製品説明はDFRobotのサイトのHTMLをそのまま転載しております。当社サイトでの表示確認をしていないため表現が正しくない部分が残っております。また情報の更新が遅れている可能性もありますので、製品情報についてはDFRobot社のサイトをご確認ください。当社コード番号"DFROBOT-"以降のコードを製品検索に利用できます。たとえば、DFROBOT-DFR0470-ENTは、”DFR0470-ENT”とDFRobot社のサイトにて検索ください。
商品コード: DFROBOT-ROB0117