《お取り寄せ商品》Bluno - An Arduino Bluetooth 4.0 (BLE) Board

本商品はお取り寄せ商品（輸入代行）です。他の商品と同時にご注文いただいた場合、全ての商品が入荷してから出荷します。お急ぎの商品と一緒にご注文なさらないよう、ご注意下さい。この商品のお買い求めの手続きを完了し、代金のお支払いをいただいてから、お取り寄せを行います（請求書払いのご契約をいただいている場合には、もちろんこの契約が優先です）。納期は仕入先に在庫がある場合、通常1.5～2ヶ月ほどです。発注は定期的に、まとめて行いますので、お取り寄せ依頼時に仕入先在庫があっても、当社発注時に仕入先在庫がない場合、納期は未定となります。

本商品は電気用品安全法、電波法、その他日本の法律に準拠していない可能性があります。本商品のお取り寄せは輸入代行サービスです。お取り寄せのご案内をご確認の上、ご注文ください。当社はお取り寄せ品に関して一切の責任を持ちません。お客様自身で適法かつ安全にご利用いただけることを充分にご確認いただき、お取り寄せをご依頼ください。また商品が輸入できないなどの問題が発生した場合、ご注文をキャンセルする場合があります。

---

Introduction

It's time to get Bluetooth 4.0 into your arduino project and sync it up with your phone! For aficionados of smart devices and wearables with this new tech (Bluetooth 4.0 low energy, BLE), now you can go further than hacking things apart to start prototyping with your Arduino.
As a member of the Bluno Family, Bluno is first of its kind in integrating Bluetooth 4.0 (BLE) module into Arduino Uno, making it an ideal prototyping platform for both software and hardware developers to go BLE. You will be able to develop your own smart bracelet , smart pedometer and more. Through the low-power Bluetooth 4.0 technology, real-time low energy communication can be made really easy.

Note on Compatibility: Bluno Family does not support other brand BLE devices

since the difference of Bluetooth profile. Read more in wiki.

Bluno integrates a TI CC2540 BT 4.0 chip with the Arduino UNO development board. It allows wireless programming via BLE, supports Bluetooth HID, AT command to config BLE and you can upgrade BLE firmware easily. Bluno is also compatible with all Arduino Uno pins which means any project made with Uno can directly go wireless!

What's more, we also developed an App for Bluno (both Android and IOS) and they are completely opensource. You can modify and develop your own BLE-hardware platform. Below is a quick demo video covering some of the major features of Bluno with the help of an Accessory Shield for Bluno, which will also be available very soon.

In short, you can use Bluno with any Bluetooth 4.0 compatible devices and enjoy features such as wireless transmission, master and slave settings, wireless programming and even establishing a Bluetooth HID connection with the PC between devices.

For the demo application and arduino code, we integrated DFRobot wireless libraries for the beginners. The idea is supplying a simple way for you to use wireless modules without learning the wireless comunication protocol. However, for the developer, we recommend to custom or choose the protocol according to the application.

Introduction to Bluno Series

Specification

• On-board BLE chip: TI CC2540
• Wireless Programming via BLE
• Support Bluetooth HID
• Support AT command to config the BLE
• Transparent communication through Serial
• Upgrade BLE firmware easily
• DC Supply: USB Powered or External 7V~12V DC
• Microcontroller: Atmega328
• Bootloader: Arduino Uno ( disconnect any BLE device before uploading a new sketch )
• Compatible with the Arduino Uno pin mapping
• Size: 60mm * 53mm(2.36"*2.08")
• Weight: 30g

Documents

• Wiki (Bluno - An Arduino Bluetooth 4.0 (BLE) Board)
• Introduction to Bulno Family
• Schematic

Demo Tutorials

• Bluno Basic Demo
• Bluno Accessory Shield Demo
• Programming the Internet lesson 37: Exploring the DFRobot Bluno

User Review

• Embedded Computing Review by Rei Vilo

Custom Application from User

• Bluno iOS Terminal (developed by Air Vision)
• 3D Printable Bumper for Bluno (by omega368)

ShippingList

• Bluno x1

Projects

Project 1. Build KnowFlow: automatic water monitor

KnowFlow is the name of this water quality monitoring device, based on Arduino Uno. It can automatically monitor 5 parameters of water: pH, Temperature, Dissolved Oxygen, Electronic Conductivity, ORP.

• Central Control Unit: Arduino Uno (DFRobot Bluno in this case) and Expansion Shield (DFRobot Expansion Shield V7.1 in this case)
• Water Sensors: pH (pH probe and pH circuit board); EC (EC probe and EC circuit board); ORP (ORP probe and ORP circuit board); Temperature (temperature probe and temperature circuit board); Dissolved Oxygen (DO probe, BNC and circuit board); real time clock circuit board
• Data Storage: Micro-SD module, Micro SD card
• Fit and fix: mounting plate, water proof box( 200 mm x 150 mm x 75 mm), water proof joint
• Other parts: Cables (Wires), bread board, bolts and nuts, screws, battery, double-sided adhesive, write on tape, small wrench, spiral cable wrap

Project 2. How to Make an Automatic Christmas Tree

With all the lights and decorations that people use at Christmas, power is left on all the time and electricity bills skyrocket. I made this motion detecting Christmas tree light setup that only turns on when people are nearby.

Hardware list

• PIR Sensor x1
• Bluno x1
• I/O Expansion Shield v7.1 x1
• LED Strip x1
• Relay Switch x1
• Mini mp3 module
• DFSpeaker v1.0
• Regular power extension lead (with some modifications)
• 1k resistors x2

Project 3. How to Make a Santa Alarm

Using the new RGB color sensor available at DFRobot, I rigged up a simple proximity alarm. I can use this to warn me if someone is in a close range of my Christmas tree putting presents under there. The hardware of this project is pretty simple and suitable for beginners.

• 1 x Bluno Microcontroller v2.0 (SKU: DFR0267)
• 1 x Gesture Sensor
  
• 1 x I/O Expansion Shield v7.1 (SKU: DFR0265) (the extra I/O’s are very useful and prevent messy wiring!)
  
• 1 x Digital Buzzer Module (SKU: DFR0032)
  
• 1 x 220R Resistor (any will do)
  
• 1 x Red LED
  
• 1 x Breadboard (for prototyping and checking the circuit – any will do.)
  
• Jumper Wires for connections

---

上記製品説明はDFRobotのサイトのHTMLをそのまま転載しております。当社サイトでの表示確認をしていないため表現が正しくない部分が残っております。また情報の更新が遅れている可能性もありますので、製品情報についてはDFRobot社のサイトをご確認ください。当社コード番号"DFROBOT-"以降のコードを製品検索に利用できます。たとえば、DFROBOT-DFR0470-ENTは、”DFR0470-ENT”とDFRobot社のサイトにて検索ください。

---

商品コード: DFROBOT-DFR0267