コンテンツにスキップ
地震や土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
大雪や地震、土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
SKU 5093

《お取り寄せ商品》Gravity: Digital Adjustable Infrared Proximity Sensor

送料区分: 650

商品コード: DFROBOT-SEN0239

発売日: 2018-11-21

短いURL: ssci.to/5093

この商品は取寄商品です

¥2,244
¥2,244 - ¥2,244
Current price ¥2,244

本商品はお取り寄せ商品(輸入代行)です。他の商品と同時にご注文いただいた場合、全ての商品が入荷してから出荷します。お急ぎの商品と一緒にご注文なさらないよう、ご注意下さい。この商品のお買い求めの手続きを完了し、代金のお支払いをいただいてから、お取り寄せを行います(請求書払いのご契約をいただいている場合には、もちろんこの契約が優先です)。納期は仕入先に在庫がある場合、通常1.5~2ヶ月ほどです。発注は定期的に、まとめて行いますので、お取り寄せ依頼時に仕入先在庫があっても、当社発注時に仕入先在庫がない場合、納期は未定となります。

本商品は電気用品安全法、電波法、その他日本の法律に準拠していない可能性があります。本商品のお取り寄せは輸入代行サービスです。お取り寄せのご案内をご確認の上、ご注文ください。当社はお取り寄せ品に関して一切の責任を持ちません。お客様自身で適法かつ安全にご利用いただけることを充分にご確認いただき、お取り寄せをご依頼ください。また商品が輸入できないなどの問題が発生した場合、ご注文をキャンセルする場合があります。


Introduction

This is an Arduino digital infrared distance sensor. It has an adjustable detection range, 0cm - 200cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line, etc. Infrared wave length is part of the Sun's natural light spectrum. While is a nice fit for indoor projects, outdoors with plenty of sun light and reflective surfaces on the sight is not advised. It's incredibly repurposable and can be used for a lot of different projects. The adjustable screw on it's back makes it very convenient for different purposes. Digital read on your Arduino pin and you are ready to go. Good sensor choice for quick prototyping. Use it on a robot for wall detection and wall follower, or as some of the projects listed below as a trigger system. It's round shape with the screw holders make it a good choice for a home-made assembled robot, with a hole of it's diameter and the holders you can place it aiming at different positions on a robot. Or even place it near your PC to turn on and off your monitor. To ease the difficult of using this sensor, a Gravity Interface is adapted to allow plug & play. The IO expansion shield is the best match for this sound senor connecting to your Arduino.

Specification

  • Output Form: PNP normally open
  • Signal Type: Digital signal
  • Operating Voltage: 3~5V
  • Interface: XH2.54-3Pin
  • Detection range: 0~200 cm
  • Switch Level: 0, No obstacles in the area; 1, There are obstacles in the area.
  • Operating Temperature: -15~60 ℃
  • Temperature Effect: Within -15 ℃ to + 60 ℃, the detection distance is below 10% at + 25 ℃
  • Storage Temperature: -25~75 ℃
  • Humidity: 35% ~ 95% RH
  • Size: 75 * Φ18 mm
  • Documents

    Product wiki

    ShippingList

    Gravity: Digital Adjustable Infrared Proximity Sensor for Arduino (0~200 cm) x1

    上記製品説明はDFRobotのサイトのHTMLをそのまま転載しております。当社サイトでの表示確認をしていないため表現が正しくない部分が残っております。また情報の更新が遅れている可能性もありますので、製品情報についてはDFRobot社のサイトをご確認ください。当社コード番号"DFROBOT-"以降のコードを製品検索に利用できます。たとえば、DFROBOT-DFR0470-ENTは、”DFR0470-ENT”とDFRobot社のサイトにて検索ください。


    商品コード: DFROBOT-SEN0239