コンテンツにスキップ
地震や土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
大雪や地震、土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
SKU 4167

《お取り寄せ商品》Gravity:Analog Rotation Potentiometer Sensor V1 For Arduino

送料区分: 650

商品コード: DFROBOT-DFR0054

発売日: 2018-11-21

短いURL: ssci.to/4167

この商品は取寄商品です

¥495
¥495 - ¥495
Current price ¥495

本商品はお取り寄せ商品(輸入代行)です。他の商品と同時にご注文いただいた場合、全ての商品が入荷してから出荷します。お急ぎの商品と一緒にご注文なさらないよう、ご注意下さい。この商品のお買い求めの手続きを完了し、代金のお支払いをいただいてから、お取り寄せを行います(請求書払いのご契約をいただいている場合には、もちろんこの契約が優先です)。納期は仕入先に在庫がある場合、通常1.5~2ヶ月ほどです。発注は定期的に、まとめて行いますので、お取り寄せ依頼時に仕入先在庫があっても、当社発注時に仕入先在庫がない場合、納期は未定となります。

本商品は電気用品安全法、電波法、その他日本の法律に準拠していない可能性があります。本商品のお取り寄せは輸入代行サービスです。お取り寄せのご案内をご確認の上、ご注文ください。当社はお取り寄せ品に関して一切の責任を持ちません。お客様自身で適法かつ安全にご利用いただけることを充分にご確認いただき、お取り寄せをご依頼ください。また商品が輸入できないなどの問題が発生した場合、ご注文をキャンセルする場合があります。



Introduction

This is an arduino rotation potentiometer , it is able to rotate upto 300-degree. With the Arduino IO expansion board, in combination, it can be very easy to achieve position-dependent interaction with the rotating effect or produce MIDI instrument. So with this sensor you can learn how rotary potentiometer works and what analog signal is. You can have much fun with this basic input device.Gravity Interface is adapted to allow plug&play. The IO Sensor Expansion Shield is the best match for this sound senor connecting to your Arduino. As this sensor can work at 3.3V which make it compatible with Raspberry Pi, intel edison, joule and curie.

Improvement List

  • Wide voltage range from 3.3V to 5V
  • Standard assembling structure (Times-of-5mm Center distance between two 3mm mounting holes)
  • Easily recognitive interfaces of sensors ("A" for analog and "D" for digital)
  • Icons to simplely illustrate sensor function
  • High quality connector
  • Immersion gold surface

Gravity:Analog Rotation Potentiometer Sensor V1 For Arduino Demo Project 1

Rotating this sensor can input different voltage which can change Brightness of this LED.

Gravity:Analog Rotation Potentiometer Sensor V1 For Arduino Demo Project 2

What is potentiometer?"A
potentiometer is an instrument for measuring the potential (voltage) in a circuit. A fraction of a known voltage from a resistive slide wire is compared with an unknown voltage by means of a galvanometer. The sliding contact or wiper of the potentiometer is adjusted and the galvanometer briefly connected between the sliding contact and the unknown voltage. The deflection of the galvanometer is observed and the sliding tap adjusted until the galvanometer no longer deflects from zero. At that point the galvanometer draws no current from the unknown source, and the magnitude of voltage can be calculated from the position of the sliding contact." Analog Rotation Potentiometer Sensor V1 For Arduino Related Projects:How to Build A Smart Cooling Fan with Arduino?

Specification

  • Supply Voltage: 3.3V to 5V
  • Interface type: Analog
  • 300 degree rotation sensor
  • Size:22x31mm (0.87x 1.2 in)

Documents

ShippingList

Projects

Project 1. How to Make a Small Cannon
In this project it shows how author made a small cannon for my lovely player in reality.
Main Components:
DFRduino UNO R3
Gravity IO Expansion & Motor Driver Shield
DF15RSMG 360 Degree Motor (20kg)DC Decelerate Motor
Push Button
Gravity: Analog Rotation Potentiometer Sensor V1 For Arduinolaser carved board



上記製品説明はDFRobotのサイトのHTMLをそのまま転載しております。当社サイトでの表示確認をしていないため表現が正しくない部分が残っております。また情報の更新が遅れている可能性もありますので、製品情報についてはDFRobot社のサイトをご確認ください。当社コード番号"DFROBOT-"以降のコードを製品検索に利用できます。たとえば、DFROBOT-DFR0470-ENTは、”DFR0470-ENT”とDFRobot社のサイトにて検索ください。



商品コード: DFROBOT-DFR0054