コンテンツにスキップ
地震や土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
大雪や地震、土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
SKU 4156

《お取り寄せ商品》Gravity: Digital Buzzer For Arduino

送料区分: 650

商品コード: DFROBOT-DFR0032

発売日: 2018-11-21

短いURL: ssci.to/4156

この商品は取寄商品です

¥352
¥352 - ¥352
Current price ¥352

本商品はお取り寄せ商品(輸入代行)です。他の商品と同時にご注文いただいた場合、全ての商品が入荷してから出荷します。お急ぎの商品と一緒にご注文なさらないよう、ご注意下さい。この商品のお買い求めの手続きを完了し、代金のお支払いをいただいてから、お取り寄せを行います(請求書払いのご契約をいただいている場合には、もちろんこの契約が優先です)。納期は仕入先に在庫がある場合、通常1.5~2ヶ月ほどです。発注は定期的に、まとめて行いますので、お取り寄せ依頼時に仕入先在庫があっても、当社発注時に仕入先在庫がない場合、納期は未定となります。

本商品は電気用品安全法、電波法、その他日本の法律に準拠していない可能性があります。本商品のお取り寄せは輸入代行サービスです。お取り寄せのご案内をご確認の上、ご注文ください。当社はお取り寄せ品に関して一切の責任を持ちません。お客様自身で適法かつ安全にご利用いただけることを充分にご確認いただき、お取り寄せをご依頼ください。また商品が輸入できないなどの問題が発生した場合、ご注文をキャンセルする場合があります。


Introduction

Here is the simplest sound making module that you can use High/Low to drive it. Just change the frequency it buzz, you can hear different sound. It is widely used on your daily application, like PC, refrigerator,phones and so on. And you also can create many interesting interactive project with this small but useful module.

To ease the difficult of using this sensor, a Gravity Interface is adapted to allow plug&play. The IO expansion shield is the best match for this sound senor connecting to your Arduino. As this sensor can work at 3.3V which make it compatible with Raspberry Pi, intel edison, joule and curie.

features

  • Wide voltage range from 3.3V to 5V
  • Standard assembling structure (two 3mm holes with multiple of 5cm as interval)
  • Easily recognitive interfaces of sensors ("A" for analog and "D" for digital)
  • Icons to simplely illustrate sensor function
  • High quality connector
  • Immersion gold surface

Specification

  • Type: Digital
  • Power supply: 5VDC

Documents

ShippingList

Projects

Project 1. Head-mounted Myoelectric Mouse
Parts in need:
Arduino Leonardo Microcontroller
Gravity : Digital Buzzer for Arduino
Gravity: Analog EMG Sensor by OYMotion
6 DOF IMU Shield For Arduino
Speech Module

Project 2. How to Make a Santa Alarm
Using the new RGB color sensor available at DFRobot, I rigged up a simple proximity alarm. I can use this to warn me if someone is in a close range of my Christmas tree putting presents under there. The hardware of this project is pretty simple and suitable for beginners.
1 x Bluno Microcontroller v2.0 (SKU: DFR0267)
1 x Gesture Sensor
1 x I/O Expansion Shield v7.1 (SKU: DFR0265) (the extra I/O’s are very useful and prevent messy wiring!)
1 x Digital Buzzer Module (SKU: DFR0032)
1 x 220R Resistor (any will do)
1 x Red LED
1 x Breadboard (for prototyping and checking the circuit – any will do.)
Jumper Wires for connectionsProject 3. Annoying Soil Moisture Sensor with Photon and IFTTT ProjectNever forget to water your plants again with this super annoying project. It combines visual, auditory, and textual cues that will prevent you from doing anything else until you provide your plant with much-needed hydration. A piezo buzzer constantly blares a shrill note, while a super-bright LED annoys your peripheral vision. In addition, this project will send constant texts to your phone reminding you that your plant needs to be watered. Sounds like fun, right?Hardware Components:



上記製品説明はDFRobotのサイトのHTMLをそのまま転載しております。当社サイトでの表示確認をしていないため表現が正しくない部分が残っております。また情報の更新が遅れている可能性もありますので、製品情報についてはDFRobot社のサイトをご確認ください。当社コード番号"DFROBOT-"以降のコードを製品検索に利用できます。たとえば、DFROBOT-DFR0470-ENTは、”DFR0470-ENT”とDFRobot社のサイトにて検索ください。



商品コード: DFROBOT-DFR0032